Specifications

FLEXIPOWER MPA – 10kW – 200kW

Features & Benefits

High power density (up to 200kW per rack) for floor space saving

• MPA with Safe-Swap Modules (SSM) for premium power protection availability
• Low Total Cost of Ownership (TCO)
• Cost saving during entire life-cycle
• Flexibility / Scalability
• Ease of power upgrade, pay as you grow
• Enhanced Serviceability
• Rapid fault recovery
• Link to Thycon Remote Monitor
• Instantaneous fault recognition

Low input THDi and near unity PF results in major installation savings

FlexiPower MPA Advanced Booster Technology (ABT) generates a near unity input power factor and reduces the input THDi to values <3% even at partial loads. The low THDi generated by the UPS, avoids expensive over sizing of gen-sets that are often used as backup for longer outages.

The near unity input power factor at partial and full load reduces input cable and fuse sizes.

FlexiPower Mini & Maxi ranges: 10-200 kW

FlexiPower Maxi: 24-200 kW

FlexiPower Mini: 10-120 kW

SPACE - MPA was designed to reduce space

Thanks to the advanced transformer-less design the modules are very compact in size and weight. Up to 5 modules can be accommodated into a single space-saving rack reaching highest power density of up to 342kW/m2.

Blade servers have leading power factors and therefore require adequate UPS power.

FlexiPower MPA provides full rated power in the range of 0.9-leading to 0.8-lagging power factors. Thus saving valuable data centre floor space.

The reduction of the material content results in saving of natural resources and decreases the environmental impact.

In addition, the compact size of the modular FlexiPower MPA saves packaging weight and decreases substantially energy consumption in transport to customers.

Output Load Capability Curve

RECYCLING - MPA was designed to use materials to reduce environmental impact

Thycon works with suppliers to identify materials that will reduce the environmental footprint of Thycon products and that of our customers.

Materials innovation at Thycon is reducing the environmental impact of materials we select or already use for Thycon products. This innovation often aligns with our objective of reducing materials and recycling costs. Thycon considers the following aspects of materials innovation:

• Substituting materials when there are concerns due to their potential effects on people and the environment
• Eliminating materials of concern from our products
• Lowering product weight and size to decrease resource use and reduce environmental impacts throughout the product life cycle